PRODIGY - Hybrid SiO2 Wet Coat Sealant - HI-Con Series

PRODIGY — Hybrid SiO₂ Wet Coat Sealant (HI-CON Series)

PRODIGY is D-TAIL LAB’s hybrid SiO₂ + polymer spray-on / rinse-off protection that delivers up to 3 months of durable hydrophobics, slick feel, and crisp gloss in minutes.

What PRODIGY Does

Boosts water beading and surface slickness while enhancing clarity on paint, plastics, glass, and wheels (cool). The hybrid chemistry leaves a uniform protective layer as you rinse.

Why You Need PRODIGY

• Ultra-fast protection — spray on a wet vehicle, rinse, and dry.
• Hybrid SiO₂ + polymer tech — strong beading, slickness, and gloss.
• Up to 3 months durability with proper prep and maintenance.
• HI-CON concentrate — excellent cost-per-use via dilution.

Where to Use It

• Clear-coated paint and clear coat
• Gloss plastics & exterior trims
• Exterior glass (light application)
• Wheels (only when cool; avoid brake components)

Directions

Important — Dilution

• Use demineralized water. Dilute 1:20 up to 1:50 (product:water) depending on desired strength.

Wet Coat (spray-on / rinse-off)

1. Work on a cool, shaded vehicle that has been freshly washed and left wet.
2. Spray PRODIGY evenly on wet surfaces (paint, glass, plastics, wheels).
3. Rinse immediately with a pressure washer to activate and level the protection. Do not allow the product to dry on the surface.
4. Dry with a clean microfiber drying towel or forced air.

Dry-Surface Application (alternative method)

1. Panel must be clean and cool. For best bonding, perform a panel wipe to remove polishing oils.
2. Apply 1–2 sprays to a microfiber/foam applicator and work a small section (≤ ~60 cm × 60 cm).
3. Buff off immediately with a quality edgeless microfiber towel. If working outdoors, you may spray onto a wet microfiber, spread, then finish with a dry towel.

Compatibility & Care

• Safe on most exterior washable surfaces when used as directed; always spot test sensitive trims.
• Never let the product dry on the panel; re-wet and re-rinse if needed.
• Maintain with a pH-neutral shampoo to maximize longevity.

Pairs Well With

• Edgeless 420 GSM Microfiber Towels — safe drying and final buff.
• HDPE Chemical-Resistant Bottle (1 L) — durable container to pre-mix your dilution.
• Red Heavy-Duty Chemical Sprayer — chemical-resistant trigger for consistent, even coverage.

Good to Know

For best results, pre-wash with a contactless foam (e.g., ROGUE) and follow with a pH-neutral contact wash (e.g., ORIGIN) before applying the wet coat.