INNOVACAR 粘土棒

促销价格¥130.00 CNY

Fra-ber 的 Innovacar 粘土棒有 3 种类型的粘土棒(软、中、强),每种 100 克,适用于汽车的机械净化。它们的重量和弹性使其易于手动处理,并且它们装在小塑料盒中出售,以便可以储存和重复使用。他们移除交通影片;昆虫、树脂和铁残留物以及汽车上的所有杂质。该产品适用于涂漆和镀铬表面。

 

使用指南

  1. 选择合适的 Fra-Ber 粘土棒。
  2. 清洗并擦干车辆。
  3. 用润滑剂浸泡(DL润滑油) 并用手压平粘土条。
  4. 在大约 40 X 40 厘米的小部分上工作,在工作表面上均匀地雾化粘土的润滑剂。
  5. 将润滑剂也喷在粘土棒上,并轻轻地将其通过重叠通道的工作表面。在存在特别顽固的杂质时,可能需要重复通过。尝试重塑粘土,以保持凉爽干燥的表面。
  6. 继续在同一区域工作,直到去除所有杂质。当达到最佳效果时,粘土将在表面平滑流动。
  7. 用超细纤维布去除多余的润滑剂。
  8. 重复步骤 3 到 6,直到整辆车都用粘土适当地加工过。
  9. 在工作结束时,存放粘土棒并用润滑剂雾化它以保持其柔软和灵活。
  10. 稍后进行快速洗车,然后再抛光或涂抹密封剂。

红粘土酒吧:这种粘土棒是最强大的,由于其强大的清洁能力,它可以去除重度污染。

黄色粘土棒:这是一个中等粘土棒,代表了 90% 情况下的最佳解决方案,它易于使用且速度快。

蓝粘土酒吧:它是最柔软的粘土棒,非常精致,非常适合对最精致和最复杂的表面进行去污。我们推荐它用于油漆特别细腻的老爷车。

切: 粘土棒蓝软
SKU: DCLAYS

We at

D-TAIL LAB

use cutting-edge technology and research to develop the best car care products possible. Our team of experts tirelessly creates unique formulas designed to clean, restore and protect surfaces from harsh environmental factors, such as UV rays, dirt, and pollutants. This allows your vehicle to stay looking great for longer while also making it easier to clean.

Our nano-ceramic protection products are easy to apply and provide a durable and long-lasting shield against everyday wear and tear. They are also completely safe for use on all types of surfaces, meaning you can rest easy knowing that your prized possessions are protected without the risk of any damage or discoloration.

Whether you are a car enthusiast looking for the best possible protection for your vehicle, or a business owner looking to keep your fleet of vehicles looking great, D-TAIL LAB has the expertise and products to meet your needs. We are committed to providing our customers with the best possible service and support, and are always happy to provide expert advice and guidance to help you get the most out of our products.

Directions

  • Choose the appropriate grade depending on contaminant level and clearcoat hardness .
  • Wash and dry the vehicle.
  • Soak the clay bar in hot water and flatten the clay bar with your hands.
  • Work on small sections, about 40 X 40 cm, and use a lubricant of your choice to help reduce chance of damaging the surfaces .
  • Spray the lubricant on the clay bar and pass it gently over the working surface with overlapping passages. In the presence of particularly stubborn impurities, repeated passages may be necessary. 
  • Continue to work on the same area until all impurities are removed. When an optimal result is achieved, the clay will flow smoothly on the surface.
  • Proceed later with a quick car wash before polishing or applying the paint protection.

Download